Table of Contents
Advertisement
Solution: If you can start the backup feature without a problem, but it fails during the backup process,
try the following:
1. Close other applications, then restart the backup process.
2. Check if the destination medium is damaged, try to select another file path and then try again.
• Question: When do I need to restore the computer to the factory default settings?
Solution: You can restore the computer to the factory default settings when it fails or when you need
to reinstall the operating system. This will restore your computer back to the initial state when you first
started it up after receiving it from the shore. Ensure that you have backed up your critical data before
doing this to avoid data loss.
Tips on using your computer
This topic provides tips on using your computer for the first time.
Reading the manuals
Read the manuals that come with your computer before using the computer.
Connecting to power
The supplied battery pack is not fully charged at purchase. To charge the battery and begin to use your
computer, install the battery pack, connect the computer to an electrical outlet, and then the battery will be
charged automatically.
Installing the battery pack
For instructions on installing the battery pack, refer to the Safety, Warranty, and Setup Guide that comes
with your computer.
Connecting the computer to an electrical outlet
To connect the computer to an electrical outlet, do the following:
1. Plug the ac power adapter into an electrical outlet.
2. Connect the power cord to the transformer pack.
3. Insert the power jack into the computer.
Turning on the computer
Press the power button to turn on the computer.
Configuring the operating system
You might need to configure the operating system when you use the computer for the first time. The
configuration process might include the following steps:
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account
Putting the computer into sleep mode or shutting it down
To conserve power, put the computer into sleep mode or shut it down when the computer is not in use.
16
User Guide
Advertisement
Table of Contents
