Tips On Using Your Computer; Reading The Manuals; Connecting To Power; Turning On The Computer - Lenovo B480 User Manual

2. Check if the destination medium is damaged, try to select another file path and then try again.
• Question: When do I need to restore the computer to the factory default settings?
Solution: You can restore the computer to the factory default settings when it fails or when you need
to reinstall the operating system. This will restore your computer back to the initial state when you first
started it up after receiving it from the store. Ensure that you have backed up your critical data before
doing this to avoid data loss.

Tips on using your computer

This topic provides tips on using your computer for the first time.

Reading the manuals

Read the manuals that come with your computer before using the computer.

Connecting to power

The supplied battery pack is not fully charged at purchase. To charge the battery and begin to use your
computer, install the battery pack, connect the computer to an electrical outlet, and then the battery will be
charged automatically.
Installing the battery pack
For instructions on installing the battery pack, refer to the Setup Poster that comes with your computer.
Connecting the computer to an electrical outlet
To connect the computer to an electrical outlet, do the following:
1. Connect the power cord to the ac power adapter.
2. Connect the ac power adapter to the power jack of the computer firmly.
3. Plug the power cord into an electrical outlet.

Turning on the computer

Press the power button to turn on the computer.

Configuring the operating system

You might need to configure the operating system when you use the computer for the first time. The
configuration process might include the following steps:
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account

Putting the computer into sleep mode or shutting it down

To conserve power, put the computer into sleep mode or shut it down when the computer is not in use.
Putting your computer into sleep mode
If you will be away from your computer for a short time, put the computer into sleep mode. When the
computer is in sleep mode, you can quickly wake it up to resume use and bypass the startup process.
12
User Guide