Table of Contents
Advertisement
Getting started
Headset base installation
Option 3: Connect the headset with a corded or cordless phone
To use this installation option, make sure the headset base mode
is set to NO LIFTER MODE.
•
Plug the small end
of the headset
base power
adapter into the
POWER jack
(green dot) at
the back of the
headset base.
•
Plug the headset
base power adapter
into an electrical
outlet not controlled
by a wall switch.
Telephone
line cord
Cordless or corded
phone
26
•
Plug one end of the telephone
line cord into the TEL WALL
JACK (red dot) at the back of
the headset base.
•
Plug the other end of
the telephone line cord
into the line splitter.
•
Plug the line splitter
into the telephone wall
jack (or DSL filter if
Line splitter
you subscribe to DSL
Internet service).
A DSL filter
(not included) is
required if you have
DSL high-speed
Internet service.
•
Connect another
telephone line cord
between the telephone
and the line splitter.
Advertisement
Table of Contents
