Programmable Function Keys - Icom iF9011S Instruction Manual

2
PANEL DESCRIPTION
■ Function display (Continued)
!0 ALPHANUMERIC DISPLAY
Displays an operating channel number, channel name, Set
mode contents, DTMF code, etc.
!1 KEY INDICATOR
Indicate the programmed function of the front panel keys
([I], [II] and [III]).
See the operating guide for details of Analog and P25
Trunking/Conventional system operations. Consult your
Icom dealer or system operator for details concerning your
transceiver's programming.
7

■ Programmable function keys

The following functions can be assigned to the following pro-
grammable function keys and switches;
[EMR], [Side1], [Side2], [Side3], [I], [II], [III], [Ω], [≈], [∫], [√],
[APP], [HOME], ABC switch and Toggle switch.
Consult your Icom dealer or system operator for details con-
cerning your transceiver's programming.
If the key indicator shows the programmed function key
name, push the front panel key ([I], [II] or [III]) under the key
indicator to activate the programmed function.
( The function key name in parentheses in the following expla-
nation is displayed for that key indicator; e.g. "UP")
For ABC and Toggle switches:
The programmable key functions to ABC and Toggle switches
are limited. (See p. 10 for details.)
CH UP AND DOWN KEYS "UP" "DOWN"
➥ Push to select an operating channel. When [Rotary selec-
tor] selection mode is "operating channel," this function is
not available.
➥ Push to select a scan group after pushing and holding
[Scan A Start/Stop]/[Scan B Start/Stop].