Function Priority; Configuration Setting - Sena 20S User Manual

20S

19 FUNCTION PRIORITY

The 20S operates in the following order of priority:
(highest) Ambient mode
Mobile phone
Voice command mode by double tapping
Intercom
Stereo music by audio cable
Music sharing by Bluetooth stereo music
FM Radio
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a higher priority
function. For example, stereo music is interrupted by intercom call,
and intercom conversation is interrupted by incoming mobile phone
call.
40
20 20S CONFIGURATION SETTING
You can set the configuration of the 20S by the voice menu instruction
as below.
1. To enter into voice configuration menu, press and hold the Jog
Dial for 12 seconds until the LED shows solid blue and you hear
high tone double beeps. You will also hear a voice prompt saying
"Configuration menu".
2. Rotate the Jog Dial clockwise or counter-clockwise to navigate
between the menus. You will hear voice prompts for each menu
item as below.
3. You can enable the feature or execute the command by tapping
the Phone Button, or disable the feature by tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the 20S will exit the
configuration and go back to stand-by.
5. If you want to exit the configuration immediately, rotate the Jog
Dial until you hear a voice prompt saying "Exit configuration",
and tap the Phone Button.