Assigning Speed Dial - Sena 20S User Manual

The voice prompt for each menu item is as below:
(1) Speed dial
(2) Audio multitasking
(3) Intercom-audio overlay
sensitivity
(4) VOX phone
(5) HD intercom
Exit configuration
Universal intercom
pairing
Delete all pairings
Sidetone
(6) Voice prompt
(7) Sidetone
(8) Delete all pairings
(9) Universal intercom pairing
(10) Exit configuration
Speed dial
Audio Multitasking
Intercom-audio
overlay sensitivity
VOX phone
HD intercom
Voice prompt

20.1 Assigning Speed Dial

Voice Prompt
Factory Default
Execute
1. To assign a phone number as a speed dial, rotate the Jog Dial
until you hear a voice prompt saying "Speed dial".
2. Tap the Phone Button, and you will hear voice prompts saying
"Speed dial one" and "Phone connected".
– Rotate the Jog Dial to select one of three speed dial numbers
and you hear a voice prompt saying "Speed dial (#)".
3. Call a phone number you want to assign and you will hear a voice
prompt saying "Save speed dial (#)". The phone number is
automatically assigned to the selected speed dial number. Then
the phone call will hang up before being connected.
4. To exit the menu, rotate the Jog Dial clockwise or counter
clockwise until you hear a voice prompt saying "Cancel", and
tap the Phone Button to confirm. You will then hear a voice prompt
saying "Cancel". If any button is not pressed within 1 minute,
the 20S will exit the configuration menu and go back to stand-by
mode.
20S
"Speed dial"
N/A
Tap the Phone Button
41