Intercom And Mobile Phone Call - Sena 20S User Manual

2. Rotate the Jog Dial clockwise or counter-clockwise to navigate
between the menus. You will hear voice prompts for each menu
item.
3. Tap the Phone Button to select a voice menu among the followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
4. After selecting the last number redial menu, you will hear a voice
prompt saying "Last number redial". Then, to redial the last
phone call number, tap the Phone Button or the Jog Dial.
5. To call one of the speed dials, rotate the Jog Dial clockwise or
counter-clockwise to navigate between the menus until you hear a
voice prompt saying "Speed dial (#)". Then, tap the Phone Button
or the Jog Dial.
6. If you want to exit the speed dial immediately, rotate the Jog
Dial until you hear a voice prompt saying "Cancel", and tap the
Phone Button or the Jog Dial. If any button is not pressed within 15
seconds, the 20S will exit the voice speed dial menu and go back
to stand-by mode.
(4) Speed dial 3
(5) Cancel
Note:
1. Make sure that you connect the mobile phone and the headset in order
to use the speed dial function.
2. Speed dial needs to be setup through the headset (refer to section 20.1,
"Assigning Speed Dial"), Sena Smartphone App, or Device Manager first.
Answer Tap Phone Button or Tap Jog Dial or Say "Hello"
End Tap Phone Button or Press Jog Dial for 2"
Reject Press Jog Dial for 2"
Transfer Press Phone Button for 2"
Call Use phone keypad
Speed Dial Double tap Phone Button
Voice Dial Tap Phone Button
Mobile Phone Call Button Operations

7.3 Intercom and Mobile Phone Call

1. When you have an incoming mobile phone call during an
intercom conversation, you will hear a ring tone. You can choose
whether to 1) answer the mobile phone call and stop the intercom
conversation, or 2) reject the phone call and stay on the intercom
conversation.
20S
21