20S
12 AMBIENT MODE
You can hear the ambient sound outside of your helmet by activating
the Ambient Mode. To activate the Ambient Mode, press the Ambient
Mode Button which is placed on the bottom of the clamp unit. To
deactivate the Ambient Mode, press the Ambient Mode Button again.
Ambient Mode Button
Note:
The ambient mode has the highest priority, so you cannot make or answer
phone call, listen to music, or have an intercom conversation if the Ambient
Mode is activated.
28
13 VOICE COMMAND
The voice command of the 20S allows you to operate certain operations
by simply using your voice. You can control the 20S completely
handsfree using the voice recognition. The voice command function
works only with English commands.
Voice Command Procedure:
1. In stand-by mode, say "Hello Sena" or double tap the surface of
the main unit to enter the voice command mode. In non-stand-by
modes, double tap the surface to enter the voice command mode.
2. Speak a voice command from the table below:
Mode Status
Intercom call
End intercom
Standby / Music /
Call last intercom
FM Radio /
Group intercom
Intercom pairing
Cancelling operations
Function
Voice Command
"Intercom
[one, two, ... , nine]"
"End intercom"
"Last intercom"
"Group intercom"
"Pairing intercom"
"Cancel"