To Login - NEC DT750 User Manual

To LOGIN

Follow the steps below to open the Web Programming:
Internet browser
Start up
Enter IP address of the target DT750 on the address toolbar and then press Enter key.
The Web Programming Login screen appears. Enter a user name (type "USER") and a password (Note 1), then
OK
click button.
Note 1: Enter the same password used when logging into the DT750. "0000" is used as password by the default setting.
For IP address of DT750, contact to the System Administrator.
When the login screen does not appear, check the LAN connection status and entered IP address. If the problem persists,
please contact the system administrator.
on the PC.
128