Before using for the first time
If the j symbol and three
zeros are flashing in the
display
Removing
packaging material
14
This section will tell you everything you need to do
before using the cooker for the first time.
Heat the oven and clean the accessories. Read the
safety instructions in the Important information"
section.
Firstly, check to see if the j symbol and three zeros
are flashing in the display.
Set the time.
1. Press the j clock button.
12:00 appears and the j clock symbol flashes.
2. Set the time using the + or - button.
The time selected is adopted after a few seconds. The
cooker is now ready for use.
You must remove the packaging material before using
the oven for the first time.
Packaging material such as polystyrene foam and
cardboard will be found between the shelves and the
oven casing, and in front of the back panel. Remove
this.
Your oven is now ready for use.