Page 1
820415 BK0015500\REV RAPIDS 4WD ROBOTIC POOL CLEANER QUICK START GUIDE PLEASE READ CAREFULLY BEFORE USING YOUR POOL CLEANER Aqua Products, Inc 25 Rutgers Avenue Cedar Grove, NJ 07009 United States...
Page 2
QUICK START INSTRUCTIONS (Steps 1-3) Place the cleaner in your pool using the handle and turn upside Straighten out the floating cable and plug the cleaner into the down to remove any air bubbles. power supply. DO NOT plug the power supply’s power cord into the wall outlet at this point.
Page 3
ROBOT REmOvAl and FIlTER BASKET ClEANING INSTRUCTIONS (Steps 4-9) Press and release the power button to turn power supply OFF. Gently pull cleaner to edge using the floating cable. Lift (See Settings and Troubleshooting Guide) unit out using the front handle and let the water drain. Grab the handle on the filter basket and gently pull up- Open the basket by using the tab on the basket door.
CAll CUSTOmER SERvICE AT 800-221-1750 This guide provides basic troubleshooting. A more detailed troubleshooting guide is included separate from this guide. Figure A You may also download the Quick Start Guide as well as the Settings and Troubleshooting Manual at: www.Aquabot.com...
Need help?
Do you have a question about the RAPIDS 4WD and is the answer not in the manual?
Questions and answers
Good afternoon i just wondering if there is any way to set up the time on the gen mini aquabot bk 45 pvc?