Installation Instructions - GE Profile PV977 Owner's Manual And Installation Instructions

Island chimney vent hood

Hide thumbs Also See for Profile PV977:

Owner's manual and installation instructions (60 pages)

Owner’s manual and installation instruction (54 pages)

Owner's manual & installation instructions (48 pages)

Table of Contents

Available languages

STEP 9 CONNECT ELECTRICAL

Verify that power is turned off at the source.

WARNING:

with a ground wire, a ground must be provided

by the installer. When house wiring is aluminum,

be sure to use U.L. approved anti-oxidant

compound and aluminum-to-copper connectors.

• Remove the 6 screws on the junction box cover

and the knockout on the top left side.

Knockout

Junction

box cover

• Secure the house wiring to the junction box with

a strain relief (not provided).

• Connect the white lead to the branch circuit white lead.

• Connect the black lead to the branch circuit black lead.

• Connect the green/yellow lead to the branch

circuit green lead or bare ground lead.

• Secure all the connections with wire nuts on each

electrical connector.

• Push the wires into the junction box and replace

the cover. Be sure the wires are not pinched.

• Secure the junction box cover with the 6 original

screws.