Installation Instructions - GE UVW7301 Owner's Manual & Installation Instructions

Installation
Instructions
If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
for local inspector's use.
IMPORTANT
codes and ordinances.
Note to Installer – Be sure to leave these
instructions with the Consumer.
Note to Consumer – Keep these instructions for
future reference.
Skill level – Installation of this vent hood requires
basic mechanical and electrical skills.
Completion time – Approximately 1 to 3 hours
Proper installation is the responsibility of the
installer.
Product failure due to improper installation is not
covered under the Limited Warranty.
CAUTION
Due to the weight and size of
these vent hoods and to reduce the risk of personal
injury or damage to the product, TWO PEOPLE
ARE REQUIRED FOR PROPER INSTALLATION.
FOR YOUR SAFETY:
WARNING
Before beginning the installation,
switch power off at service panel and lock the
service disconnecting means to prevent power from
being switched on accidentally. When the service
disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to
the service panel.
– Save these instructions
– Observe all governing
Chimney Vent Hood
PRODUCT DIMENSIONS
10-7
*Height to
13-1
ceiling
"
30" Models Require a 30" Wide Opening
*Height to
Ceiling
36" Models Require a 36" Wide Opening
* For supplied duct cover ceiling heights for vented installation and
recirculating installation, refer to the table on page 13.
*Height to Ceiling
Vented Recirculating
Min
Max
2- "
29
*Height to Ceiling
Vented Recirculating
Min
Max
Allow 1" overlap
of duct.
49-7000197 Rev. 0
"