Olympus FE-320 Quick Start Manual page 31

VIDEO OUT
Playing back pictures on a TV
NTSC IPAL
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV's video signal type .
• TV video signal types differ by country/region. Check the video signal type before connecting the camera
to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
FE-320/X-835/C-540
s:
CD
::J
C
o
'"0
CD
....,
Q)
~
o
::J
en
Connect to the TV's
video input (yellow) and
audio input (white)
terminals.
Settings on the TV
Turn the TV on and set it to video input mode.
• For details of switching to video input, refer to
your TV's instruction manual.
• Images and the information displayed on the
screen may be cropped depending on the TV's
settings.
Connector cover
AV cable (provided)
AV cable (provided)
FE-340/X-855/C-560
Multi-connector --+~~
Settings on the camera
Turn the camera on and press
[E]
to select the
playback mode.
• The last picture taken is displayed on the TV.
Use the arrow pad to select the picture you want
to display.
Multi-connector
POWER SAVE
Setting the camera to the power save mode
OFF
ION
When no operation has been performed for approximately 10 seconds while in shooting mode, the monitor
automatically shuts off. Pressing the zoom lever or other buttons restores the camera from power save mode.