I
Blurry images cannot be stabilized
Even if [DIS EDIT] is selected, not all blurry pictures can be fixed.
• If the shutter speed is low, if the camera is severely shaken, if the flash has fired,* and/
or if [SMILE SHOT] is used *: The recorded picture may not be stabilized or cannot
acquire the proper stabilization effect.
* FE-320/X-835/C-540 only.
• Moving object: The image cannot acquire the proper stabilization effect.
In addition, the digital image stabilization mode cannot be activated when:
• the internal memory capacity or the card capacity is insufficient.
• the image was extracted from a movie, modified using a computer, edited on the
camera, or created with another camera.
I
The red-eye cannot be fixed
• Depending on the picture, the red-eye may not be fixed. Also, parts except the eye may be fixed.
Bright specks appear in the picture
• Light reflecting from dust and other particles in the air at night may appear as bright specks in
pictures taken using the flash.
Playing back pictures in the internal memory
• When a card has been inserted in the camera, the pictures in the internal memory cannot be played
back. Pull out the card before operating the camera.
I
Viewing picture information
• Play back a picture, and press DISP.l6. Press
DISP.l6
repeatedly to change the amount of
information displayed.
~
"DISP.l6 button Changing the information on display/Display the menu guide" (P. 18)
Quickly displaying a desired picture
• Turn the zoom lever to the W-side to display the pictures as thumbnails (index display).
~
"Zoom lever Zooming while shooting/Close-up playback" (P. 16)
Erasing sound recorded to still pictures
• Once sound is added to a picture, it is not possible to erase the sound. In this case, make a re-
recording with silence.
~
"~Adding
sound to still pictures" (P. 28)
G)
CD
......
~
:::::l
<0
......
o
"
: ::::l
o
~
'<
o
c
...,
("')
III
3
CD
...,
III
0-
CD
...... ......
CD
...,
Viewing the entire picture on a computer screen
The size of the picture displayed on a computer screen changes depending on the computer settings. When
the monitor setting is 1,024
x
768 and you are using Internet Explorer to view a picture with an image size of
2,048
x
1,536 at 100%; the entire picture cannot be viewed without scrolling. There are several ways you can
view the entire picture on the computer screen.
View the picture using image browsing software
• Install the OLYMPUS Master 2 software from the provided CD-ROM.
Change the monitor setting
• The icons on the computer desktop may be rearranged. For details on changing the settings on your
computer, refer to the computer's instruction manual.
EN
41