Olympus FE-320 Quick Start Manual page 29

SETUP menus
Shooting mode
Playback mode
SETUP
MEMORY FORMAT
(FORMAT')
BACKUP'
• .G)
PIXEL MAPPING
O/[B
PWON SETUP
MENU COLOR
SOUND SETTINGS
101
_
....
e)
VIDEO OUT
POWER SAVE
~~[3B@
•
EXIT.!!!!! SET.[illg
* A card is required.
• The factory default settings are displayed in gray ( ).
MEMORY FORMAT (FORMAT)
Formatting the internal memory or card
All existing data, including protected pictures, are erased when the internal memory or card is formatted
(images registered to "My Favorite" are not erased). Make sure that you save or transfer important data to a
computer before formatting.
• Make sure there is no card inserted in the camera when formatting the internal memory.
• Be sure that the card is inserted in the camera when formatting the card.
• Before using non-Olympus cards or cards which have been formatted on a computer, you must format them
with this camera.
BACKUP
Copying pictures in the internal memory to the card
Insert the optional card into the camera. Copying data does not erase the picture in the internal memory.
• It takes some time to back up data. Check that the battery is charged before starting the copy.
•
...!~
Selecting a display language
You can select a language for on-screen display. Available languages vary depending on where you
purchased this camera.
You can add other languages to your camera with the provided OLYMPUS Master software.
~
(1)
::::J
C
o
"'0
(1)
.,
Q)
.....
o
::::J
C/)
PIXEL MAPPING
Adjusting the image processing function
The pixel mapping feature allows the camera to check and adjust the CCD and image processing functions.
It is not necessary to operate this function frequently. Approximately once a year is recommended. Wait at
least one minute after taking or viewing pictures to allow the pixel mapping function to perform properly. If you
turn the camera off during pixel mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press ~.
Q/[E]
Turning on the camera with the
0
or
(E]
button
YES
• Pressing
0
turns on the camera and starts the camera in the shooting
mode.
• Pressing
[B
turns on the camera and starts the camera in the playback
mode.
NO The power is not turned on. To turn on the camera, press
POWER
button.
29
- - - - - - - - - - - - - - - - - - - - - - E N