Wireless Zero Config Setup - Motorola MC45 User Manual

5 - 6 MC45 User Guide
In the Transmit Key drop-down list, select the key to transmit.
19.
Tap Next. The IPv4 Address Entry dialog box displays.
20.
IP Address Entry Dialog Box
Figure 5-7
Ensure that all three check boxes are selected.
21.
Tap Next. The Battery Usage dialog box appears.
22.
In the Battery Usage Mode dialog box select a power consumption option.
23.
Battery Usage Dialog Box
Figure 5-8
Tap Save.
24.

Wireless Zero Config Setup

To setup WLAN using WZC:
NOTE Obtain the proper WLAN configuration information from your system administrator prior to performing the
WZC setup procedures.
The following setup procedure example shows setup of a WLAN using WEP encryption.
Tap Start >
1.
> Wireless Launcher > Wireless Zero Config.