Phone Book Access Profile Services; Dial-Up Networking Services - Motorola MC45 User Manual

Tap Menu > Connect via Bluetooth.
13.
Synchronization is automatically initiated. The ActiveSync icon appears on the lower right corner of the Today
screen.
If an Authentication is required, the Enter Passcode screen appears, type an alphanumeric passkey (PIN
code), then tap Next; enter the same passkey on the other device.
The passkey is recommended for enhanced security. Your passkey must be between 1 to 16 alphanumeric
characters.
If you do not want to use a passkey, tap Next.
To disconnect the ActiveSync connection, tap My Apps > Active Sync.
14.
Tap Disconnect.
15.

Phone Book Access Profile Services

Phone Book Access profile (PBAP) is used to synchronize contacts between a remote device and the MC45. To
establish an PBAP synchronization:
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 30 feet (10 meters) of one another.
2.
Tap Start > Settings > Bluetooth > Devices.
3.
Tap Add New Device.The MC45 searches for a Bluetooth device, such as a Car Kit.
4.
Select a device from the list.
5.
Tap Next. The Enter Passcode window appears.
6.
Enter the Passcode and the tap Next. The device is added to the Bluetooth list.
7.
A dialog box appears requesting if you want to transfer contacts to the car kit.
8.
Select Yes or No.
9.
If Yes is selected, contacts from the MC45 are transferred to the car kit.
10.

Dial-Up Networking Services

Dial-up networking allows the user to connect a PC or laptop to the MC45 and use the MC45 as a modem to
connect to an office network or ISP.
Before setting up dial-up networking, obtain dial-up information and other necessary settings (username, password
and domain name, if required) for the office network or ISP. To create a new Bluetooth connection:
Ensure the MC45 is discoverable and connectable.
1.
On the PC or laptop, set up Bluetooth according to the manufacturer's instructions.
2.
On the PC or laptop Bluetooth software, search for the MC45 and select the Dial-up Networking service.
3.
Using dial-up software on the PC or laptop, connect to the MC45.
4.
The MC45 phone function dials the ISP number and connects to the ISP.
5.
To verify, on the PC or laptop, launch Internet Explorer and open a web site.
6.
Using Bluetooth 7 - 13