Questions - Lexington Forge SSW30FTAL Owner's Manual

QUESTIONS?

EPA emissions rating (g/h, non-catalytic)
1. Maximum burn times and heat outputs are based on laboratory testing using full loads of seasoned hardwoods, and may vary in
individual use depending on how the stove is operated, type and moisture content of fuel, and other factors. Maximum burn times
are achieved under different operating conditions than are maximum heat outputs.
2. These values are based on operation in building code-conforming homes under typical winter climate conditions in the U.S. If your
home is of nonstandard construction (e.g. unusually well-insulated, not insulated, built underground, or if you live in a more severe
and more temperate climate), these fi gures may not apply. Since so many variables affect performance, consult your Lexington
Forge Authorized Dealer to determine realistic expectations for your home.
3. Under specifi c conditions used during EPA emissions testing.
NEED TO ASK QUESTIONS? REQUIRE PARTS INFORMATION?
First, contact the Lexington Forge Dealer from whom you purchased your stove, for parts and service. Have the following information
ready:
• Date of purchase
• Serial number (from the back of your stove)
• Model number (from the back of your stove)
• Dealer name and phone
If you still need assistance, contact Lexington Forge technical support (below).
WONDERING ABOUT THE WARRANTY?
See the last page of this manual for general warranty information. For additional information, contact your Lexington Forge dealer or
Lexington Forge Parts and warranty.
Model and product serial numbers can be found on the certifi cation label of your stove.
4
Log Length
Maximum burn time
Average area heated (sq.ft)
Range of heat output
Maximum heat output
Weight
Loading
Air Control
Lexington Forge
Technical Service, Parts & Warranty
Phone: 877-406-9180
Fax: 877-406-5647
"
20
2
10 hours
2
2,200 sq. ft.
3
11,000-30,600
1
55,400
2.5 gph
520 lbs
Front
Manual
63D0001