Questions - Lexington Forge SAVANNAHSSW40 Owner's Manual

QUESTIONS?

EPA emissions rating (g/h, non-catalytic)
1. Maximum burn times and heat outputs are based on laboratory testing using full loads of seasoned
hardwoods, and may vary in individual use depending on how the stove is operated, type and moisture
content of fuel, and other factors. Maximum burn times are achieved under different operating
conditions than are maximum heat outputs.
2. These values are based on operation in building code-conforming homes under typical winter climate
conditions in the U.S. If your home is of nonstandard construction (e.g. unusually well-insulated, not
insulated, built underground, or if you live in a more severe and more temperate climate), these figures
may not apply. Since so many variables affect performance, consult your Lexington Forge Authorized
Dealer to determine realistic expectations for your home.
3. Under specific conditions used during EPA emissions testing.
NEED TO ASk QUESTIONS? REQUIRE PARTS INFORMATION?
First, contact the Lexington Forge Dealer from whom you purchased your stove, for parts and service.
Have the following information ready:
• Date of purchase
• Serial number (from the back of your stove)
• Model number (from the back of your stove)
• Dealer name and phone
If you still need assistance, contact Lexington Forge technical support (below).
WONDERING AbOUT THE WARRANTy?
See the last page of this manual for general warranty information. For additional information, contact your
Lexington Forge dealer or Lexington Forge Parts and warranty.
Model and product serial numbers can be found on the certification label of your stove.
4
Log Length
Maximum burn time
Average area heated (sq.ft)
Range of heat output
Maximum heat output
Weight
Loading
Air Control
Lexington Forge
Technical Service, Parts & Warranty
Phone: 877-406-9180
Fax: 877-406-5647
"
22
2 13 hours
2 3,000 sq. ft.
3
12,000-36,000
1 75,000
4.3 gph
520 lbs
Front
Manual
63D4002