Maintenance - Lexington Forge SSW30FTAL Owner's Manual

REMOVING BAFFLE:
1. Pull the cotter pin from the retaining collar on the front tube. See Detail A.
2. Tilt up the front side of the baffle and insulation.
3. Slide the tube to the right to free from the collar, tilt down and push towards the left, then pull out the tube. See Figure
15.
4. Work baffle and insulation from top of stove.
NOTE: When reinstalling baffl e make sure the baffl e stops at the edge of center baffl e plate. See Detail B.
SECTION RIGHT SIDE VIEW
1.
Step 1: Pull the cotter pin from the
retaining collar on the front tube.
Detail A
3.
Step 3: Slide the tube to
the right to free from the
collar, tilt down and push
towards the left then pull
out the tube.
63D0001
A
B
Figure 15: Removing Baffl e
2.
Step 2: Tilt up the front side of
the baffl e and insulation
4.
Step 4: Work baffl e and insulation
from top of the stove
NOTE: When reinstalling baffl e
make sure the baffl e stops at
the edge of center baffl e plate.
Detail B

MAINTENANCE

C
17