Audio Clips - Axis P3364-V User Manual

Hide thumbs Also See for P3364-V:

Table of Contents

AXIS P3364–V

Video and Audio

G711

•

G726

Sample rate - The number of times per second the sound is sampled. A higher sample rate will provide better audio quality, but

also requires a greater bandwidth.

Bit rate - Set the required bit rate depending on the selected encoding. A higher bit rate will give better audio quality. A lower bit

rate may have latency or delay, but will require less bandwidth.

For more information about these settings, please see the online help

Audio Output

An external speaker can be connected to the product's Audio-out connector (a built-in ampliﬁer is required for this). The output can

be connected to another ampliﬁer with speakers. A stereo connector must be used for the audio out.

Conﬁgure the audio output settings under Video & Audio > Audio Settings.

Output gain - Control the volume (dB Full Scale) of the line audio output. If the sound is too low, choose a higher dB. If the

sound is too high, choose a lower dB.

Audio Clips

An audio clip is a sound ﬁle that can be played either when an event occurs or manually from the Live View page. Audio clips can

be uploaded to the product or recorded by a microphone connected to the product.

You can add, play, download, modify and remove audio clips from Video & Audio > Audio Clips. For more information see the

online help

Note

Audio clips cannot be used if the product's audio functionality is enabled. The audio functionality is enabled on the Audio

tab under Video & Audio > Video Stream.

Table of Contents