Switching Satellites - KVH Industries DIRECTV User Manual

DIRECTV Mobile Receiver/Controller User's Guide
9-5

Switching Satellites

If your antenna system is configured for multiple
satellites, you can easily switch between the available
satellites either automatically or manually.
Automatic Switching
When the system is set up for automatic switching,
the antenna automatically switches satellites as you
change channels using the primary receiver's remote.
Follow the steps below to select automatic switching.
1. Using the primary receiver, press the MENU
button to access the main menu.
2. Highlight the System Setup tab and press
SELECT.
3. Highlight the Antenna tab.
4. Highlight the Sat Select button and press
SELECT.
5. Highlight Auto Switch and press SELECT.
can now switch satellites simply by changing
channels on the remote control.
9.8
Antenna
Antenna
You
Sat Select – Automatic
Antenna Controls
Antenna Settings
Current Settings Modify Settings
Diagnostics Sat Select
Cancel
Model ID : 1
Go to Sat 101
Model : TVR6
Go to Sat 119
Version : 1.4
Tuning Delay Go to Sat 110 : 0
Antenna Capabilities : Multisat
Go to Sat 72.5
Two-way
Auto Switch
54-0376