System Wiring Diagrams - KVH Industries DIRECTV User Manual

Appendix A

System Wiring Diagrams

The diagrams on the following pages show how to
wire the system for various configurations:
Original KVH mobile receiver/controller* AND:
No additional receivers
One (1) additional mobile receiver/controller
Two (2) additional mobile receiver/controllers
One (1) standard-def home receiver**
Two (2) standard-def home receivers**
One (1) additional mobile receiver/controller and one (1) standard-def home receiver**
One (1) standard-def digital video recorder (DVR)**
One (1) standard-def home receiver and one (1) standard-def DVR**
One (1) additional mobile receiver/controller and one (1) standard-def DVR**
* The original mobile receiver/controller, bundled with the TracVision system, is required in all configurations. It supplies power to the antenna.
** The KVH mobile receiver/controller is a standard-definition unit, not a high-definition (HD) unit, so the system cannot recognize high-definition
(HD) channels. If you wish to use a home receiver or DVR with the system, be sure to use a standard-definition (non-HD) model.
54-0376
Before making any wiring changes, be sure to
turn off vehicle/vessel power.
If your desired configuration is not shown here,
please call KVH Technical Support at 401-847-3327
for assistance.
Requires Part #:
72-0177 (x2)
72-0177 & 19-0347
72-0177 & 19-0410
72-0177 (x2) & 19-0347
72-0177 & 19-0410
72-0177, 19-0410, & 19-0123
72-0177 (x2) & 19-0410
System Wiring Diagrams
Page:
N/A A.4
72-0177 A.6
A.8
A.10
A.12
A.14
A.16
A.18
A.20
A.3