Turning The Beeper On/Off - KVH Industries DIRECTV User Manual

9-3

Turning the Beeper On/Off

The mobile receiver beeps to indicate the status of the
antenna.
2 beeps = Antenna is powering on
1 beep = Antenna is powering off
If you prefer, you can silence (turn off) the beeper.
Follow the steps below if you need to turn the beeper
on or off.
1. Press the MENU button to access the main menu.
2. Highlight the System Setup tab and press
SELECT.
3. Highlight the Antenna tab.
4. Highlight the Modify Settings button and press
SELECT.
5. If you want to turn on the beeper, highlight
Beeper On. If you want to turn off the beeper,
highlight Beeper Off. Then press SELECT.
54-0376
Change Settings – Beeper
Antenna
Antenna Settings
Antenna Controls
Current Settings
Cancel
Diagnostics
DewShield Auto
DewShield Off
Model ID
Model Beeper On
Version
Beeper Off
Tuning Delay
Set Primary
Antenna Capabilities
Set Secondary
Show Serial #s
Antenna
Show SW Version
Set to Defaults
Antenna Controls
Modify Settings
Sat Select
: 1
: TVR6
: 1.4
: 0
: Multisat
Two-way
9.5