Designating The Receiver As Primary Or Secondary - KVH Industries DIRECTV User Manual

DIRECTV Mobile Receiver/Controller User's Guide
9-4 Designating the Receiver as
Primary or Secondary
Each mobile receiver/controller must be designated
as either a primary or a secondary receiver.
Primary Receiver
• Supplies power to the antenna
• Allows you to control the antenna
• Can receive local channels (within your DMA)
• Must be connected directly to the antenna, either
via a single coax cable or a splitter's "Primary"
jack (see Appendix A for wiring diagrams)
• Only one allowed per system
Secondary Receiver
• Does not power or control the antenna
• Simply receives a TV signal from the antenna
• A system may have one, none, or multiple
secondary receivers
9.6
Follow the steps below to designate the receiver as a
primary or secondary receiver.
1. Press the MENU button to access the main menu.
2. Highlight the System Setup tab and press
SELECT.
3. Highlight the Antenna tab.
4. Highlight the Modify Settings button and press
SELECT.
Change Settings – Receiver Designation
Antenna
Antenna Settings
Current Settings
Diagnostics
DewShield Auto
DewShield Off
Model ID
Model Beeper On
Version
Beeper Off
Tuning Delay
Set Primary
Antenna Capabilities
Set Secondary
Show Serial #s
Antenna
Show SW Version
Set to Defaults
Antenna Controls
Modify Settings
Cancel
Sat Select
: 1
: TVR6
: 1.4
: 0
: Multisat
Two-way
54-0376