Central Machinery 46813 Assembly And Operating Instructions Manual page 16

To Attach The Power Switch:
1. Insert two Semi-Circle Head Screws (part #2E) from the rear of the Switch Plate
(part #3E). Then, loosely screw one Square Nut (part #4E) onto each
Semi-Circle Head Screw. (see Figures b, g, and assy. diagram e.)
2. While holding the Switch Plate (part #3E) to the front, insert and slide the two
Square Nuts (part #4E) into the lower slot of the Front Rail (part #7H).
(see Figures b, g, and assy. diagram e.)
3. Slide the Switch Plate (part #3E) to a convenient position. Then, secure the
entire Switch Assembly (parts #1E through #12E) to the Front Rail (part #7H) by
tightening the two Semi-Circle Head Screws (part #2E).
(see Figures b, g, and assy. diagram e.)
SKU 46813
RIP FENCE (#10C)
SAW TABLE
RIP FENCE
(#10C)
SAW TABLE
(#17H)
REAR RAIL (#3H)
SCALE INDICATOR
(#20C)
PAGE 16
LOCK BLOCK (#7C)
Figure K
FRONT RAIL
(#7H)
FINE ADJUSTMENT
KNOB (#30C)
RIP FENCE HANDLE
(#37C)
Figure l