Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21f
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Central Machinery 62519
Summary of Contents for Central Machinery 62519
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Information
4. DON’T USE IN DANGEROUS ENVIRONMENT. to do a job for which it was not designed. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted. Page 2 For technical questions, please call 1-888-866-5797. Item 62519... - Page 3 It’s safer than using your hand and it frees both hands to operate tool. 21. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop. Item 62519 For technical questions, please call 1-888-866-5797. Page 3...
-
Page 4: Scroll Saw Safety Warnings
9. Maintain labels and nameplates on the tool. the tool and out of children's reach. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Page 4 For technical questions, please call 1-888-866-5797. Item 62519... -
Page 5: Vibration Safety
If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUCTIONS. Item 62519 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 Table at 90 degrees to the Blade. should not be relied upon for precision settings. Make practice cuts in scrap wood to determine if 3. Tighten the Table Lock Knob. the angle settings are correct. Page 6 For technical questions, please call 1-888-866-5797. Item 62519...
- Page 7 Blade Tension Foot Knob Lock Knob Workpiece Foot Saw Table Saw Blade Variable Speed Knob Bevel Scale Bevel Scale Indicator Table Lock Knob Switch with Vacuum Hose Connection Safety Key Item 62519 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Workpiece And Work Area Set Up
Tighten material through the Blade or the Blade could break. the Workpiece Foot Lock Knob. Do not allow the workpiece to contact the blade yet. Page 8 For technical questions, please call 1-888-866-5797. Item 62519... -
Page 9: Inside Cuts
Removing stop, then remove the Saw Blade as described in and Installing Blades on page 11. Removing and Installing Blades on page 11. The workpiece will come with it. Item 62519 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Cleaning And Maintenance
WARNING! If the supply cord of this the wax off with a clean cloth after application. power tool is damaged, it must be replaced only by a qualified service technician. Page 10 For technical questions, please call 1-888-866-5797. Item 62519... -
Page 11: Removing And Installing Blades
Medium turns on 1/4 to 1-3/4″ soft 0.11" 0.02" metals, wallboard, hardboard. Cuts wood from 1/8 to 1-1/2″ thick. Extra thin cuts on soft woods and 0.095" 0.01" other materials up to 1/4". Item 62519 For technical questions, please call 1-888-866-5797. Page 11... - Page 12 4. Remove the old Blade. Pull the Saw Table Insert (64) out and rotate it 90° to the position shown in Figure C:. Workpiece Foot 90° Saw Table Insert Figure C: Page 12 For technical questions, please call 1-888-866-5797. Item 62519...
-
Page 13: Troubleshooting
See Table A on page 3. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply and remove the Safety Key before service. Item 62519 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Parts List
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175344113 when ordering parts. Page 14 For technical questions, please call 1-888-866-5797. Item 62519... -
Page 15: Assembly Diagram
Assembly Diagram Item 62519 For technical questions, please call 1-888-866-5797. Page 15... - Page 16 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 62519 and is the answer not in the manual?
Questions and answers
I need a part for my scroll saw. Part#62519
The manual states that all repairs and part replacements should be performed by certified and licensed technicians. It does not provide specific sources for purchasing replacement parts. You may need to contact a qualified service technician for assistance.
This answer is automatically generated
donde veo el diageama de conponentes driver
The component diagram for Central Machinery part number 62519 can be found near the end of the manual.
This answer is automatically generated
I need a replacement switch for scroll saw 62519
The manual advises that all repairs and parts replacements, including replacing the switch, should be undertaken by certified and licensed technicians. For assistance, you can call the technical support number at 1-888-866-5797.
This answer is automatically generated
nesesito el driver