MP-202 Telephone Adapter
9.4.3
General
This section displays the connection's general parameters.
Parameter
Schedule
Network
MTU
9.4.4
PPP Configuration
Refer to ''PPP Configuration'' on page
9.4.5
PPP Authentication
Refer to ''PPP Authentication'' on page
9.4.6
PPP Encryption
Refer to ''PPP Encryption'' on page
Version 2.6
Table 9-9: General Settings
By default, the connection is always active. However, you can configure
scheduler rules (via Advanced>Scheduler Rules) in order to define time
segments during which the connection may be active. Once a scheduler
rule(s) is defined, this field changes to a drop-down list, allowing you to
choose between the available rules.
Select whether the parameters you are configuring relate to a WAN, LAN
or DMZ connection, by selecting the connection type from the drop-down
list.
MTU is the Maximum Transmission Unit. It specifies the largest packet
size permitted for Internet transmission. When set to its default
(Automatic), the gateway selects the best MTU for your Internet
connection. Select 'Automatic by DHCP' for the DHCP to determine the
MTU. If you select 'Manual', it is recommended to enter a value in the
range of 1200 to 1500.
82
84
Description
83
97
9. WAN Settings
May 1