Figure 5-17: Voip - Speed Dial - Direct Call; Table 5-17: 'Speed Dial Settings' - Direct Call - AudioCodes MP-202 User Manual

The figure below shows how a speed dial direct call is configured. The call is configured to
one of the pre-configured lines of a remote device (10.16.2.26).
Parameter
Speed Dial
Destination
User ID
IP Address or Host
Name
Port
MP-202 Telephone Adapter

Figure 5-17: VoIP - Speed Dial - Direct Call

Table 5-17: 'Speed Dial Settings' - Direct Call

A shortcut number which you will dial to call this party.
The entry's destination, in this case a direct call.
Specify the remote party's user ID.
Specify the remote party's IP Address or host name.
The SIP UDP or TCP port of the remote party.
52
Description
Document #: LTRT-50605
User's Manual