Figure 10-41: Bridge Section Of The Screen; Figure 10-42: Vlan Settings; Figure 10-43: No Ip Address - AudioCodes MP-202 User Manual

6. Set the bridge interface: In the 'Bridge' section of the Network Connection screen, edit
the 'Bridge' and 'WAN' interfaces to enable VLAN for all VLAN IDs (refer to the screen
below).
7. Set the bridge to use 'No IP Address'. Click Apply and OK and then click OK again.
MP-202 Telephone Adapter

Figure 10-41: Bridge Section of the Screen

Figure 10-42: VLAN Settings

Figure 10-43: No IP Address

124
User's Manual
Document #: LTRT-50605