General; Ppp Configuration; Ppp Authentication; Figure 9-19: General Pptp Settings - AudioCodes MP-202 User Manual

MP-202 Telephone Adapter
9.3.3

General

This section displays the connection's general parameters.
Parameter
Schedule
Network
MTU
9.3.4

PPP Configuration

Refer to ''PPP Configuration'' on page
9.3.5

PPP Authentication

Refer to ''PPP Authentication'' on page
Version 2.6

Figure 9-19: General PPTP Settings

Table 9-8: General PPTP Settings

By default, the connection is always active.
However, you can configure scheduler rules (via
Advanced>Scheduler Rules) in order to define
time segments during which the connection may
be active. Once a scheduler rule(s) is defined, this
field changes to a drop-down list, allowing you to
choose between the available rules.
Select whether the parameters you are
configuring relate to a WAN, LAN or DMZ
connection, by selecting the connection type from
the drop-down list.
MTU is the Maximum Transmission Unit. It
specifies the largest packet size permitted for
Internet transmission. When set to its default
(Automatic), the gateway selects the best MTU for
your Internet connection. Select 'Automatic by
DHCP' for the DHCP to determine the MTU. If you
select 'Manual', it is recommended to enter a
value in the range of 1200 to 1500.
82
83
91
9. WAN Settings
Description
May 1