MP-202 Telephone Adapter
Adding a Static Route
To add a static route:
1.
Open menu Advanced > Routing and click link 'New Route'; the screen shown below
opens.
2.
From the 'Name' drop-down list, choose 'WAN Ethernet'; configure the parameters
Destination, Netmask and Gateway.
Adding a Security Input Rule
To add a security input rule:
1.
Open menu Security > tab Advanced Filtering; the screen containing section 'Input
Rule Sets' (shown below) opens.
Version 2.6
Figure 10-21: Route Settings
Figure 10-22: Input Rule Sets
111
10. VLAN and Bridge Settings
May 1