Table of Contents
Advertisement
Step 2: Connect to the electricity
supply
We recommend that the appliance is
connected by a qualified electrician,
who is a member of the N.I.C.E.I.C.
and who will comply with the I.E.E.
and local regulations.
Important: Ensure that you route all
mains electrical cables well clear of
any adjacent heat source, such as an
oven or grill.
Warning: This appliance must be
earthed.
1. Where a fixed connection is used,
a device allowing the appliance
to be isolated on all poles from
the mains supply with a contact
opening width of at least 3mm
must be provided.
Use a 13 amp fuse.
2. A type HO5 V V-F cable must be
used as the mains lead. The cross
section must be 2.5mm
3. The mains terminal block is
positioned at the right hand rear of
the top service panel.
5. Connect the cable to the terminal
block, and tighten the cable clamp.
6. Close the terminal box, ensuring
that the cover is engaged on the
locking tabs.
Installation Instructions
.
2
31
Advertisement
Table of Contents
