VIETA VDC-48 User Manual page 8

5. Peak Level LED – Indicates the current peak level of the Signal:
Signal, -12dB, -6dB, -3dB, Over/Limit. The Input Limit LED references
to the device's maximum headroom. The Output Limit LED references
to the threshold of the output limiter.
6. LCD – Shows all the necessary information to control the unit.
7. Menu Buttons – There are 6 menu keys: <<Menu (Menu Down),
Menu>> (Menu Up), <<Cursor (Cursor Down), Cursor>> (Cursor Up),
Enter/Sys/Speed, Exit. The functions of each key is explained below:
<<Menu:
Menu>>:
<<Cursor:
Cursor>>:
Enter/Sys/Speed: Enter is used only in the System Menu to proceed
Exit:
8. Rotary Thumb Wheel – Changes parameter data values. The wheel
has travel velocity sensing which ease large incremental data
modifications. For modifying delay and frequency (1 Hz resolution),
pressing the Speed key simultaneously will increment/decrement the
data value by 100X.
Go to previous menu screen. Holding this button
down while pressing Mute key will go to the specify
channel menu.
Go to next menu screen. Holding this button down
while pressing Mute key will go to the specify
channel menu.
Go to previous cursor in the menu screen.
Go to next cursor in the menu screen.
with selected actions.
Sys enters the System Menu from the main menu.
Speed modifies delay and frequency (1 Hz
resolution mode) data values by 100X.
Exit to the Main Menu.
VIETA VDC-48 User Manual - Page 8