VIETA VDC-48 User Manual page 12

DELAY:
The maximum delay permitted is 650ms, in steps of approximately 10us. It
can be displayed in ms, ft or m. The time unit of the delay is set in the System
Menu. Please refer to page 21 for more details.
6.2 Input/Output Equalizer
EQ#:
Each input channel has 8 bands of equalization. This control selects one of
the 8 available bands.
BYPASS:
This control will un-bypass (Off) or bypass (On) the currently selected band.
TYPE:
The 5 types of EQ that can be used are: parametric (PEQ), low shelf (LO-
SHF), high shelf (HI-SHF), 1
pass (AP-2).
FREQ:
The EQ center frequency ranges from 20Hz to 30kHz in either 1Hz steps or
1/36 octave steps. The frequency steps can be selected in the System
Menu. Please refer to page 21 for more details.
I1:
DELAY:000.000ms
I1:
EQ#:1
I1:
BYPASS:Off
st
degree all-pass (AP-1), and 2
I1:
TYPE:PEQ
I1:
FREQ:1000Hz
VIETA VDC-48 User Manual - Page 12
Signal
EQ1
EQ1
EQ1
EQ1
nd
degree all-