Operating The System Menus - VIETA VDC-48 User Manual

7.0 Operating the System Menus

The System Menus allow the user to control and change parameters that
are related to the system behavior and general operation. It can be
accessed by pressing the Sys key in the main menu (when no Input/Output
or System Menu is activated). All System Menus require pressing the Enter
key to confirm and save the settings.
7.1 Preset Recall
The VDC-48 has a built in non-volatile memory that can store up to 30
different preset setups.
P:
This control selects which program to recall from the non-volatile memory.
The program name is displayed to the right of the program no.
7.2 Preset Store
The VDC-48 has a built in non-volatile memory that can store up to 30
different preset setups. A program can be stored using this menu. The old
program with the same program number will be replaced. Once the
program is
stored in the flash memory, it can be recalled at a later time, even after
power down.
P:
This control selects which preset location in the non-volatile memory to be
saved.
SYSTEM
P:1
SYSTEM
P:1
VIETA VDC-48 User Manual - Page 18
Recall
Store