Operating The Channel Menus - VIETA VDC-48 User Manual

6.0 Operating the Channel Menus

Channel Linking – While holding down the <<Menu or Menu>>, more than
1 channel from the same group (Input or Output group) can be selected to link
the channels together. The green LEDs below the Mute buttons are lit
for the linked channels. Any modification of the data for the selected
channel will be applied to the linked channels as well. To cancel the linking,
simply deselect the desired channel while the <<Menu or Menu>> key is
still pressed, or just press the Exit key to deselect all channels.
6.1 Input/Output Signal
LEVEL:
The level (or gain) ranges from -40.00dB to +15.00dB in 0.25dB steps.
POL:
The polarity (or phase) can be normal (+) or inverted (-).
I1:
LEVEL:0.00dB
I1:
POL:+
VIETA VDC-48 User Manual - Page 11
Signal
Signal