VIETA VDC-48 User Manual page 21

7.7 Communication Settings
NOTE: User must power cycle the unit for this settings to take effect.
BAUD RATE:
The sets the baud rate of the serial communication. XConsole uses a baud
rate of 115200, it should be left unchanged for most user.
DEVICE ID:
This control assigns a device ID from 1 to 16 to the unit. This ID is only
useful when a network of more than 1 unit is used in conjunction with 1 or
more XPanel.
NETWORK ID:
This control assigns a network ID from 0 to 60000 to the unit. This ID is
used for future network expansion only, please leave it at 0.
7.8 Ethernet Settings
The network settings are separated into 3 menus.
Eth-IP:
A unique IP address should be assigned to each unit in the network.
SYSTEM
BAUD RATE:115200
SYSTEM
DEVICE ID:1
SYSTEM
NETWORK ID:0
SYSTEM
:255.255.255.255
VIETA VDC-48 User Manual - Page 21
Comm
Comm
Comm
Eth-IP