VIETA VDC-48 User Manual page 13

BW:
The EQ bandwidth ranges from 0.02 to 3.61 octaves in steps of 0.01
octave. The equivalent Q value is automatically shown besides the octave
st
value. For 1
phase shift at the centre frequency. This phase shift is gradually changed
from 180 degrees above the centre frequency to the specified value.
I1:
BW:0.33 Q=4.36
LEVEL:
The EQ level (or gain) ranges from -30.00dB to +15.00dB in 0.25dB steps.
6.3 Input Graphic Equalizer
GEQ#:
The graphic equalizer has 31 bands of equalization from 20Hz to 20kHz.
This control selects one of the 31 available bands.
corresponding to each band is also shown.
LEVEL:
The GEQ level (or gain) ranges from -30.00dB to +15.00dB in 0.25dB steps.
BYPASS:
This control will un-bypass (Off) or bypass (On) the entire GEQ for this
channel.
degree all-pass (AP-1) filter, the bandwidth will sets the
EQ1
I1:
LEVEL:0.00dB
I1:
GEQ#:1
I1:
LEVEL:0.00dB
I1:
BYPASS:Off
VIETA VDC-48 User Manual - Page 13
I1:
DEG:15.5 deg
EQ1
GEQ1
f=20
GEQ1
GEQ1
EQ1
The frequency