Table of Contents
Advertisement
USER FUNCTIONS
AUX Function
General Information
The AUX key may have been programmed to either perform a predefined function or to send a preset
message to a pager/"Follow Me" system phone number (see Pager Feature section for pager operation or
the Follow Me Announcement Feature section for "Follow Me" operation). Ask your installer which
function has been assigned for your system.
AUX
PRE-DEFINED FUNCTION
Key:
If programmed for the AUX function, you can use the
keystrokes that have been stored in the system's memory. Typical functions include:
• Seldom used but repeatable sequences
• Arming sequences that involve bypassing zones before arming
• Device activation sequences
Defining the AUX Function
The system must be disarmed before defining a function.
1.
Enter
Master user code
2.
Press the desired command sequence, up to 20 keystrokes. Press the
command in the sequence.
AUX
3.
Press the
key twice to end the definition.
For example, to bypass Zones 10 and 11 and arm AWAY with NO DELAY, enter the following string:
+ FUNCTION + AUX + [6] + [10] + [11] + AUX + AWAY + [0] + AUX + AUX
Master user code
AUX
Note that the
key is included in the 20 keystroke maximum.
Performing the AUX function
Press and hold down the
The defined function will begin.
Your user code
PAGING FUNCTION
+ FUNCTION + AUX (hold down at least 2 seconds until 4 beeps sound).
AUX
key (hold down at least 2 seconds until 4 beeps sound), then enter
– 28 –
FOLLOW ME VOICE MESSAGE
AUX
key to activate a string of up to 20
AUX
key between each
Advertisement
Table of Contents
