Honeywell ADEMCO LYNXRIEN-EA User Manual page 10

QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS
REMOTE PHONE CONTROL OPERATION
To remotely disarm: ---------------------
To remotely arm in AWAY mode: -
To remotely arm in STAY mode: --
To remotely arm in AWAY or STAY mode with NO DELAY:
To remotely activate X10 devices 1-6: ----------
To remotely activate X10 devices 7 & 8: ------
To remotely deactivate X10 devices 1-6: ------
To remotely deactivate X10 devices 7 & 8:
To remotely bypass a zone: ----------
To remotely activate forced bypass: ------------
To remotely check system status: -
To hang up: ----------------------------------
*If forced bypass was enabled by your installer.
OTHER FUNCTIONS
To set the time and date: --------------
To set scheduling: ------------------------
To add a user code: ---------------------
To delete a user code
To turn Test mode on: ------------------
To turn Test mode off: -----------------
To use the defined AUX function: -
To send message to pager: ------------
To program "Follow Me" reminder phone #:
digits
To delete "Follow Me" reminder phone #:
** Only the master code can be used to add or delete another user code.
[*]
:
(except Master Code)
Press and hold AUX key 2 seconds (4 beeps) +
Press and hold AUX key 2 seconds (4 beeps)
+ [1]
+ [2]
+ [3]
.
[#] + [4] + device no
+ [#] + [4] + device no.
[#] + [7] + device no.
+ [#] + [7] + device no.
+ [6] + zone no.
+ [6] + [#]*
+ [9]
+ FUNCTION + [63]
+ FUNCTION + [64]
** + CODE + user no. (02-16)+ user code
** + CODE + user number (02-16)
+ TEST
+ OFF
+ FUNCTION + [65] + Enter up to 24
+ FUNCTION
– 10 –
+ [2] or [3] + [0]
+ [65]