Aux Function; Defining The Aux Function; Performing The Aux Function - Honeywell ADEMCO LYNXR User Manual

The AUX key may have been programmed to either perform a predefined function or to send a preset
message to a pager/"Follow Me" system phone number (see Pager Feature section for pager operation
or the Follow Me Announcement Feature section for "Follow Me" operation). Ask your installer which
function has been assigned for your system.
Key:
If programmed for the AUX function, you can use the
keystrokes that have been stored in the system's memory. Typical functions include:
• Seldom used but repeatable sequences
• Arming sequences that involve bypassing zones before arming
• Device activation sequences

Defining the AUX Function

The system must be disarmed before defining a function.
1. Enter
2. Press the desired command sequence, up to 20 keystrokes. Press the
command in the sequence.
3. Press the key twice to end the definition.
For example, to bypass Zones 10 and 11 and arm AWAY with NO DELAY, enter the following string:
Note that the key is included in the 20 keystroke maximum.
Press and hold down the key (hold down at least 2 seconds until 4 beeps sound), then enter
– 25 –
key to activate a string of up to 20
key between each