Printing From Your Mobile Phone - Canon Selphy CP800 User Manual

Printing From Your Mobile Phone

Use the Bluetooth unit BU-30 (sold separately) for wireless printing of images taken with a Bluetooth
equipped mobile phone. For details on how to use the mobile phone or on printing methods via Bluetooth
refer to the user guide included with the mobile phone.
1
2
3
Up to approx. 10 m (33 ft.)
During transfer, the blue light on the Bluetooth unit will blink. If transfer is interrupted, the unit will stop

blinking. Follow the instructions displayed on your mobile phone and try again.
The following conditions may cause transfer to slow down or fail, even within a 10 m (33 ft.) range:

- When there is an obstacle between the Bluetooth unit and the mobile phone
- When there is electromagnetic interference from magnetic fields, static electricity, or radio waves in the
area
The maximum file size that can be transferred is 2 – 3 MB (varies depending on mobile phone).

Data transfer time increases when data size is large. Therefore, the amount of time before printing may

also increase.
Depending on the mobile phone model you use, images saved on the memory card may not be printed.

Depending on the color ink cassette/paper set

Select Canon CP800 (XX:XX:XX) (X stands for one digit) when selecting a target device name on your

mobile phone.
You cannot establish a wireless connection between a computer and SELPHY.

Movies, e-mail, address book information, or images attached to an e-mail or downloaded from the

Internet cannot be printed.
SELPHY automatically sets the print orientation.

30
Make sure that a memory card is not inserted
in SELPHY, and it is not connected to a
computer.
Insert the Bluetooth unit.
Remove the cover attached to BU-30 and insert it as

shown.
Turn on SELPHY (p.

Transfer images from your mobile phone to
SELPHY.
The Bluetooth unit blinks blue during data transfer.

Printing starts after data transfer is complete.

(p. 2) you use, images may print with the edges cut off.
11).