Factory Preset Settings; Control Panel; Quick Reference To Control Buttons; Quick Reference To Lcd Icons - Dometic 3312026 series Operating Instructions Manual

Your Dometic CCC 2 thermostat has been pre-programmed. Review settings below
and adjust the settings to your personal comfort level.
Note: Any time the CCC 2 is in an idle stage (not illuminated) you will need to wake
it up by pressing any button on the CCC 2 before it will recognize a new setting at-
tempt.

Factory Preset Settings

All Zones
Function Setting
Time of Day (Clock) — — —
Each Zone
Relative Humidity
Heating 68ºF / 20ºC
Cooling 72ºF / 22ºC
Automatic 70ºF / 21ºC
Fan Speed
Mode
Humidity (select models)

Quick reference to control buttons

Press to select zone
Press to select
On and OFF
Press to select
fan speed
Press to set
clock
Press to
Press to select
select mode
program 1 or 2
Factory Preset Settings Each Zone
Program 1
Function
Heating
Cooling
50%
Automatic
Fan Speed
Mode
Time
Auto Program 2
Off Heating
Off Cooling
Automatic
Fan Speed
Mode
Time
Press to increase temperature
or humidity set-point
Press to display rela-
Press to decrease
tive humidity set-point
temperature or
(Select Models)
humidity set-point

Quick reference to LCD icons

Setting
68ºF / 20ºC
Temperature,
72ºF / 22ºC
Humidity Set-Point
70ºF / 21ºC or Error Code
Auto
Off
8:00 AM
68ºF / 20ºC
Fan Speed
72ºF / 22ºC
70º / 21ºC
Auto
Off
10:00 PM

ON/OFF

To turn ON the CCC 2 thermostat when the back light is off, first press any button
to wake up the CCC 2 thermostat. Then press and release the ON/OFF button. The
LCD will display the last programmed settings. To turn OFF the CCC 2 thermostat
press the ON/OFF button and release. Only the time of day will display when the
CCC 2 thermostat is in the OFF condition.
Press to display
inside temperature
Press to display
outside temperature
Press to select
temperature format
3
Operation Mode
Humidity Set-Point
Percent
Zone
Clean or Replace
Filter
Compressor
Delay
Programming & Operations
Time of Day
Dehumidify
Icon
Program