Functional Description; Carton Contents - Delta 36-850 Instruction Manual

Stock feeder

Hide thumbs

Table Of Contents

Table of Contents

EXTENSION CORDS

Use proper extension cords. Make sure

your extension cord is in good condition and is a 3-wire

extension cord which has a 3-prong grounding type

plug and matching receptacle which will accept the

machine's plug. When using an extension cord, be sure

to use one heavy enough to carry the current of the

machine. An undersized cord will cause a drop in line

voltage, resulting in loss of power and overheating. Fig.

D-1 shows the correct gauge to use depending on the

cord length. If in doubt, use the next heavier gauge. The

smaller the gauge number, the heavier the cord.

FOREWORD

The Delta Model 36-850 four-speed, three-roller, Stock Feeder includes a 1/4 hp, 120V single-phase reversing motor, 3

rubber feed rollers, vertical and horizontal support columns, universal joints, and an additional set of speed-changing

gears and lubricating gun.

NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in

the manual are representative only and may not depict the actual color, labeling, or accessories and are intended to

illustrate technique only.

1) Stock Feeder Assembly

2) Vertical and horizontal Support Columns

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from

all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gaso-

line or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor

paste wax.