Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
CAREFULLY READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS ON YOUR PRODUCT AND IN
THIS MANUAL. SAVE THIS MANUAL. MAKE SURE ALL USERS ARE FAMILIAR WITH IT'S WARNING AND INSTRUCTIONS
WHEN USING THE TOOL. Improper operation, maintenance or modification of tools or equipment could result in serious injury and/
or property damage.
If you have any questions or concerns relative to the use of your tool or the contents of this manual, stop using the tool and contact
DELTA
Power Equipment Corporation Customer Care at 1-800-223-7278.
®
This manual contains information that is important for you to know and understand. This information relates to protecting YOUR
SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the
manual and pay attention to these sections.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in
property damage.
Additional information regarding the safe and proper operation of this tool is available from the following sources:
•
Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851 or on-line at www.powertoolinstitute.com
•
National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201
•
American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI 01.1 Safety
Requirements for Woodworking Machines
•
U.S. Department of Labor regulations www.osha.gov
Some of the following symbols may be used in connection with this product. Please study them and learn their meaning. Proper
interpretation on these symbols will allow you to operate the tool better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Eye Protection
No Hands Symbol
Wet Conditions Alert
Pinch Warning
V
Volts
A
Amperes
Hz
Hertz
min
Minutes
~/AC
Alternating Current
ⁿ ₀
No Load Speed
.../min
Per Minute
Lbs
Pounds
Kg
Kilograms
RPM
Revolutions Per Minute
PH:1
Phase 1
SAFETY SYMBOLS - DEFINITIONS
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's manual before
using this product.
Always wear eye protection with side shields marked to comply with ANSI Z87.1.
Failure to keep your hands away from the blade will result in serious personal injury.
Do not expose to rain or use in damp locations.
Always watch for movement paying extra attention to potential areas where pinching
could occur.
Voltage
Current
Frequency (cycles per second)
Time
Type of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits, etc., per minute
Unit of weight
Unit of weight
Speed of rotation of machine
This is a 1 phase motor
DESIGNATION/EXPLANATION
5
Advertisement
Table of Contents
