Quick Reference Button Operation Guide; Replacing Remote Control Batteries - Code Alarm CA 671 Owner's Manual

Quick Reference Button Operation Guide.

Operation Function
Lock
Unlock
Headlight
Trunk
Car Finder
Panic
Remote Start
Temp Start
Daily Start
AUX1
AUX2
AUX3
AUX4
Check Status
Check Temp
Battery Saver
Vibrate
2/4 hour start
Shock Bypass
Parking Meter Timer
Alarm clock
Fahrenheit / Celsius

Replacing Remote Control Batteries

2-way LCD Remote Control:
The AAA alkaline battery inside the 2-way LCD remote control should last approximately 1 year under normal
use. When the battery becomes weak you will notice the remote control range (the distance from the vehicle the
remote control will work) deteriorate and the BATTERY icon on the LCD remote control will display. To replace
the remote control battery:
1. Lift and slide the battery cover off of the remote control.
2. Remove the old AAA battery, observing the +/- symbols on the battery, and replace with a new AAA
battery.
3. Gently slide the battery cover onto the back of the remote control until it locks into place.
4. Test operation of the remote control.
1-Way 6 Button Remote Control:
The two 3 volt lithium batteries (model CR2032 or Code Alarm part # 6BA) inside each remote control
should last approximately 1 year under normal use. When the batteries become weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate and the small LED on the
remote control will dim. To replace the remote control batteries:
1. Using a small (#1) philips screwdriver, remove the screw on the back of the remote control.
2. Gently unsnap the halves of the remote control apart.
3. Slide the lithium batteries out of the circuit board, observing the +/- symbols on the batteries
and replace with new lithium 3 volt batteries (model CR2032 or Code Alarm part # 6BA)
4. Gently snap the halves of the remote control back together and reinstall the philips screw on the
back of the remote control.
5. Test operation of the remote control.
10
Lock Unlock Trunk OPT
X
X
X
X
X X
X X
X
X X
X X
X X
X
X X
X X
X X X
X X
X
X
X
X
X
X
X X
F Operation Method
Press and Release
Press and Release
Press and Hold for 3 seconds
Press and Hold for 2 seconds
Press and Release
Press and Hold for 2 seconds
Press two times in 2 seconds
Press and Release
Press and Release
Press and Release
Press and Hold for 2 seconds
Press and Hold for 2 seconds
Press and Hold for 2 seconds
Press both together for 1 second
Press both together for 1 second
X Press and Release, When System is Disarmed
X Press and Release
Press 4 times after remote start shut down
Press and release 2, 3, or 4 times
X Press and release 1, 2, 3, 4, 5 or 6 times
X Press and Release
X Press and Release