AT&T TL7910 User Manual page 23

Getting started
Headset base installation
Option 3: Connect the headset to your computer (cont.)
3. After you have installed the AT&T Softphone Call Manager,
check to make sure the audio setting is properly configured
in your Windows system. If you have installed Skype and/or
Microsoft Lync and want to use them with your headset,
make sure the audio settings are configured correctly in the
programs as well.
a) Audio settings in Microsoft ® Windows ® system:
For Windows XP ® users:
Click Start menu and choose Control Panel.
i.
ii. Click Sounds, Speech, and Audio Devices and then click
Sounds and Audio Devices.
iii. Click the Audio tab.
Make sure AT&T DECT Headset is selected under the
iv.
Sound playback and Sound recording settings.
For Windows 7 users:
Click Start menu and choose Control Panel.
i.
ii. Click Hardware and Sound and then click Manage
audio devices under the Sound menu.
iii. Click the Playback tab and make sure AT&T DECT
Headset is set as the default speaker.
Click the Recording tab and make sure AT&T DECT
iv.
Headset is set as the default microphone.
Windows ® and Windows XP ® are registered trademarks of Microsoft Corporation.
16