Before You Begin - Razor Ecosmart metro Owner's Manual

BEFORE yOU BEGIN

Remove contents from box. Remove the foam separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during
shipping. Because the EcoSmart Metro Electric scooter was 95 percent assembled and packed at the factory, there
should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 30 minutes for assembly, not including initial charge time.
Allow up to 18 hours for initial charge (see page 4 for charging information).
Required Tools
Screw driver
(included)
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Seat
5 mm
allen wrench
(included)
2
Charger Port
Charger Plug
13/15mm wrench and
8/10mm wrench
(included)
Meijer.com
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR
ECOSMART METRO
ELECTRIC SCOOTER. The
scooter has been built to certain
Razor design specifications. The
original equipment supplied at the
time of sale was selected on the
basis of its compatibility with the
frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible.
Spoke tightener
(included)